• IP 55 WEATHERPROOF– OUTDOOR OPERATION (EN 60529)
• Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
• Separate Zone Sensitivity Setting Feature
• Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
• SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
• Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• Detects Metals regardless their orientation
• 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
• Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
• Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
• Special Environmental Magnetic Interference Display Menu
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
• Adjustable Alarm Duration (Detection Speed Regardless Alarms)
• Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
• IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
• Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
• Four-digit changeable digital Pin Code and Mechanical Lock
• Automatic Failure Display Function on LCD
• Reloading the factory default settings by one-touch button
• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects
• BATTERY OPERATION where there is no Mains Supply.
• Audio-Visual alarms are noticeable at a range of 4 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
• ABS Protective Footers for increased protection and strong fixing – Optional • STANDARD ABS Rain Shelter on Top
Weight : 58 kg
Gross weight: 64 kg
Operating voltage :70 VAC – 270 VAC 50Hz-60Hz
Power :10W Stand By- 20W (alarm)
Package (W x H x L):
Box 1: 645 x255 x 2290 mm Box 2: 240 x 250 x 805 mm Box 3: 600 x 150 x 850 mm
Ambient temperature: -20°C to +70° C
MultiZone Walk-Through Metal Detectors manufactured by ELEKTRAL A.S. is now available with many improved features with the new advanced series. Security Metal Detectors to meet with the expectations of the Security Professionals Worldwide.
YanıtlaSilThe system developed by ELEKTRAL A.S. offers increased security, enhanced metal detection possibilities with an improved deterrent application in conjunction with the Real-Time Video Prosecution Unit you may connect to a TV and change settings using a IRDA - Pilot Remote Control Unit.
Before proceeding to the Walk-Through Metal Detector entrance, visitors are expected to remove all personal metal belongings and leave them on an Object Sliding Table. This will increase the efficiency of the usage of Security Metal Detectors and proper concealed weapons detection procedures. Quality Walk-Through Metal Detectors in the market allows the Security Screening Checkpoint Law Enforcement officers to adjust the Sensitivity Level as per their security concern.
The New Series Walk-Through Metal Detectors can also be used with an embedded DVR System namely Real-Time Video Prosecution Unit. This Special Package consists of the DVR System Embedded to the WTMD Main Board, the Camera Assembly, Camera and the SD Card Storage Media as well as the TV Out Video Connection Sockets to connect your Walk-Through Metal Detector to a TV. You may use the provided IRDA Remote Controller to access settings of your WTMD and the Video Prosecution Unit as well as browse through images of alarmed visitors. Alarmed visitors images/video are automatically captured with a time-stamp and saved in 2 GB SD Card up to ~30.000 images. System allows recording of All Visitors/Alarmed Visitors Only with a time-stamp and queue number. This package is only available with sX, s15-i and sX-i walk-through metal detector models.
ThruScan/sX and advanced Series SMART DETECTORs have the Superior Automatic Sensitivity Adjustment feature enabling automatic security level assignment for target metallic objects. Also remote access via PC to Walk-Through Metal Detectors is a requirement in today’s challenging security industry. The ThruScan/sX and advanced Series also allows remote access possibilities via RS 232 Connection and/or Network Connection using an Ethernet Port. A Scada Software is commonly in use to access electronic devices remotely. The SRC SCADA Remote Control System of the ThruScan/sX and advanced Series Walk-Through Metal Detectors enables you to access the Settings of the WTMD, control and change all the settings, view traffic counters, reset the counter values and or change the Settings of the WTMD including Sensitivity Level Settings.
ThruScan Security Metal Detectors has also IRDA - Pilot Remote Control Unit for the ease of Operators on site. It also is an important measure that your Walk-Through Metal Detector should have Continuous LED Zone Indicators on Both Side Panels, providing increased visibility and target location. The reliability and robust design and continuous operation is another important issue you should consider. The ThruScan/sX and advanced Series are equipped with Built-in UPS System enabling continuous operation against electricity Cut Offs etc. power failures and/or sabotage risk.