International norm (NILECJ-0601-0602/NIJ/EN60950 Class1/IP 44 In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS and ECAC DOC 30 STANDADRD 2 COMPLIANCE
• Multi-Zone – 9 Real Detection Zones (15 Distinct Detection Zones – Divided Scanning Area and properly displayed Zone Led Indicators with Special Coil Geometry)
• Separate Zone Sensitivity Setting Feature
• Standard Preset JAILHOUSE/AIRPORT/MILITARY/POLICE PREMISES,SHOPPING MALL Security Modes
• Whilst Normal Operation, displays IN/OUT Counters and Security Level on GRAPHICAL LCD without abbreviations so that Security Staff can easily understand
• Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..
• SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object
• Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
• Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
• No Interferences between Zones and No False Alarms
• Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
• Detects Metals regardless their orientation
• 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, 5 Preset Programs
• Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
• Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
• Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
• Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
• Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
• Adjustable Random Alarm possibilities to give alarm for clean visitors at a selected ratio.
• Record Statistics of Operation Duration, Number of Visitors and Alarms (Real/Random Alarms Separately)
• Special Environmental Magnetic Interference Display Menu
• Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation
• Adjustable Alarm Duration (Detection Speed Regardless Alarms)
• Reloading the factory default settings by one-touch button Five Digit Incoming/Outgoing &Alarm Counters (Visible/Invisible) – Reset
• IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled
• Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken
• Four-digit changeable digital Pin Code and Mechanical Lock
• Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
• Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
• 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
• Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
• STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
• Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
• Manufactured for 7/24 Continuous Operation
• 74 cm Net Passage Width and 200 cm Net Passage Height
• Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects
• Installation and Operation without interference between two detectors up to a distance of min. 5 cm
• Audio-Visual alarms are noticeable at a range of 4 meters
• Micro-Processor Settings does not change when there is an electricity cut-off
• Magnetic Field inside all passage area is 0,1 Gauss
• All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
• Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use. OPTIONALS
• SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional
• REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images Optional
• IRDA – Remote Control Unit (Optional)
• Detection Functions has been tested with ECAC/NIJ/TSA Test Kits and Certified
Hiç yorum yok:
Yorum Gönder